Fuel, Cooling & Exhaust
Cooling & Climate Control (HVAC) System
Managing thermal energy across both the engine bay and the SuperCab interior, this system pairs a belt-driven centrifugal coolant loop and 195°F wax-pellet thermostat with a 1994 factory R-134a air conditioning system driven by a 10-cylinder FS10 swashplate compressor.
- Thermostat Opening Temp
- 195°F (90.5°C) wax-pellet poppet valve
- Radiator & Fan Drive
- CU1454 Aluminum/Plastic Crossflow · Silicone fan clutch
- A/C Compressor
- Ford FS10 10-cylinder double-acting swashplate
- Refrigerant Specification
- 1994 Factory R-134a · Fixed orifice tube + accumulator
← Previous System
Fuel Supply & Evaporative Control System
Next System →
Exhaust & Emissions Control (Thermactor / EGR)
Parts Catalog
All Parts →
Part Assemblies in Cooling & HVAC
Centrifugal Water Pump, Wax Thermostat & Thermal Fan Clutch
Belt-driven coolant circulation, wax-pellet phase-change temperature regulation, and silicone-viscous cooling fan coupling.
Explore Assembly →
CU1454 Crossflow Radiator, Shroud, Tank & Coolant Hoses
Aluminum-core crossflow heat exchanger, 13-psi pressure cap, molded fan shroud, and EPDM radiator/heater hoses.
Explore Assembly →
Ford FS10 10-Cylinder Swash-Plate A/C Compressor & Clutch
Five double-acting axial pistons driven by an angled rotating swash plate to pump R-134a refrigerant in both directions.
Explore Assembly →
R-134a Condenser, Orifice Tube, Evaporator & Accumulator
High-pressure heat rejection in front of the radiator, rapid pressure drop across a fixed orifice tube, and cabin cooling.
Explore Assembly →